Asic antminer L3

High-speed single-arm continuous mixer with a capacity of 1 to 5 tons of molding sand per hour. This mixer can be used both for the molding ...

The machine is designed to determine the ultimate compressive strength and shear strength of molding and core sands in the green state and b...

Sleeve model 09721 is intended for the manufacture of cylindrical samples from wet sands of molding and core sands for determining gas perme...

Акционерное общество АО «ТЕСТПРИБОР» предлагает высококачественные субминиатюрные цилиндрические разъемы собственного производства серии РС ...

• The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. • The company...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

This unit is designed for cleaning small and medium-sized castings in foundries of serial and small-scale production. It can also be used fo...

Double-arm mixer with a capacity of 3-10 t / h with a second arm 3 meters long. The second sleeve allows you to significantly expand the ser...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

Pneumatic transport is a device in the form of a sealed vessel designed to carry out loading and unloading, transport and technological work...

Топор универсальный «Volkshammer» Размеры: длина общая: 535 мм длина топора: 185 мм Материал рукояти : фиберглас (обеспечивает на...

Продается газоанализатор "Автотест-02 СО СН Д Т" С встроенным термопринтером..

The sieves are designed for sieving the sand base when determining the granulometric composition of the fineness and average grain size in l...

• The heat-resistant elevator is designed for vertical transportation of bulk materials as part of industrial production lines. • The peculi...

Sleeve model 09722 is designed to determine compaction and bulk density in accordance with GOST 23409.13-78. The principle of the liner oper...

High-speed single-arm continuous mixer with a capacity of 0.5 to 2 tons of molding sand per hour. This mixer can be used both for the moldin...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. The compan...

Installation laboratory model 029, climatic version UHL, placement category according to GOST 15150-69, is designed to separate the sandy ba...

The device is designed to determine the crumbling of molding and core sands in accordance with GOST 23409.9-78 and moldability in accordance...

B-1110 B-1110 Casting Cup Roller Batch Mixer The mixer is designed for the preparation of molding sand according to the ASG process. The pri...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

Inhabited shot blasting chamber KDO-15 is a highly efficient device designed for processing shot supplied under high pressure and high speed...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. It is intended for the manufacture o...

The core box is designed for the production of samples of molding and core sands tested in tension. The core box for the manufacture of "eig...

Shot-blasting apparatus. The device is designed for shot cleaning of castings, rolled forgings, seams of welded joints, parts after heat tre...

The complex is designed for big bags, storage, replenishment of supply bins above mixers, including with the ability to work as part of the ...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...