Купим электродвигатели постоянного тока

This complex is designed for the preparation of cold-hardening mixtures in the production of molds and cores with the ability to work on the...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

High-speed single-arm continuous mixer with a capacity of 1 to 5 tons of molding sand per hour. This mixer can be used both for the molding ...

Редукторы ООО Промсталькомплект (г.Орёл,ул.Московская,69) изготовит/отремонтирует редукторы: (цилиндрические, планетарные, конические, комб...

Водонапорная башня 15 м3 специальная металлическая конструкция для обеспечения водой.Водонапорная башня состоит из бака-накопителя объемом 1...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

Pneumatic transport is a device in the form of a sealed vessel designed to carry out loading and unloading, transport and technological work...

The sieves are designed for sieving the sand base when determining the granulometric composition of the fineness and average grain size in l...

This unit is designed for cleaning small and medium-sized castings in foundries of serial and small-scale production. It can also be used fo...

Водонапорная башня объёмом 25 м3 многофункциональная металлическая конструкция.Состоит из бака-накопителя 25 м3,ствола опоры,плиты основания...

Sleeve model 09722 is designed to determine compaction and bulk density in accordance with GOST 23409.13-78. The principle of the liner oper...

ООО Промсталькомплект (г.Орёл)предлагает производство различных деталей и узлов для гидрогенераторов по чертежам заказчика. Область применен...

The machine is designed to determine the ultimate compressive strength and shear strength of molding and core sands in the green state and b...

Sleeve model 09721 is intended for the manufacture of cylindrical samples from wet sands of molding and core sands for determining gas perme...

• The vibrating table is designed for compacting casting molds and cores made of sand-resin mixtures under conditions of serial and small-sc...

Резервуар(ёмкость) 100 м3 для воды,гсм,масла,удобрений,пищевой продукции изготавливается из листового металлопроката толщиной стали 4-5-6 мм...

The machine is designed to determine the ultimate compressive strength of molding and core sands in the green state. It is used in shop floo...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

Водонапорная башня объёмом 50 м3 - это металлическая конструкция,состоящая из бака-накопителя 50 м3 с конусом и ствола опоры.Водонапорная ба...

Наша компания изготавливает и продаёт различные металлоконструкции, в том числе водонапорные башни разных видов и разной куботуры 15 м3,25 м...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

This unit is designed for cleaning small and medium-sized castings in foundries of serial and small-scale production. It can also be used fo...

Shot-blasting apparatus. The device is designed for shot cleaning of castings, rolled forgings, seams of welded joints, parts after heat tre...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

The core box is designed for the production of samples of molding and core sands tested in tension. The core box for the manufacture of "eig...

The complex is designed for big bags, storage, replenishment of supply bins above mixers, including with the ability to work as part of the ...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. It is intended for the manufacture o...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...