Лента ЛЭТСАР липкая

The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. The compan...

• The vibrating table is designed for compacting casting molds and cores made of sand-resin mixtures under conditions of serial and small-sc...

High-speed single-arm continuous mixer with a capacity of 0.5 to 2 tons of molding sand per hour. This mixer can be used both for the moldin...

В наличии графитовые лопатки для вакуумных насосов Becker 90133000004 WN 124-034 (170х39х4 мм) - 21 шт. Так же можем изготовить лопатки любы...

Такелажная тележка предназначена для перемещения крупногабаритных грузов в тех местах, где невозможно использовать кран, таль или лебёдку. Н...

High-speed single-arm continuous mixer with a capacity of 1 to 5 tons of molding sand per hour. This mixer can be used both for the molding ...

The machine is designed to determine the ultimate compressive strength and shear strength of molding and core sands in the green state and b...

The sieves are designed for sieving the sand base when determining the granulometric composition of the fineness and average grain size in l...

В наличии графитовые лопатки для компрессора: ZBW-160E KVF 160, размер 240х50х5 мм., количество (12 шт.). Также можем изготовить лопатки люб...

The machine is designed to determine the ultimate compressive strength of molding and core sands in the green state. It is used in shop floo...

This complex is designed for the preparation of cold-hardening mixtures in the production of molds and cores with the ability to work on the...

Графитовые лопатки для вакуумных насосов Becker 90133400004 WN 124-031 (240х48х4) - 14 шт. Также можем изготовить лопатки любых размеров ( д...

Pneumatic transport is a device in the form of a sealed vessel designed to carry out loading and unloading, transport and technological work...

Double-arm mixer with a capacity of 3-10 t / h with a second arm 3 meters long. The second sleeve allows you to significantly expand the ser...

This complex is designed for the preparation of cold-hardening mixtures in the production of molds and cores with the ability to work on the...

Sleeve model 09721 is intended for the manufacture of cylindrical samples from wet sands of molding and core sands for determining gas perme...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

• The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. • The company...

This unit is designed for cleaning small and medium-sized castings in foundries of serial and small-scale production. It can also be used fo...

Pneumatic transport is a device in the form of a sealed vessel designed to carry out loading and unloading, transport and technological work...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

Лопатки графитовые для насосов компрессоров Лопатки графитовые применяются в роторно-пластинчатых насосах, а также компрессорах "сухого" (б...

This unit is designed for cleaning small and medium-sized castings in foundries of serial and small-scale production. It can also be used fo...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. It is intended for the manufacture o...

The core box is designed for the production of samples of molding and core sands tested in tension. The core box for the manufacture of "eig...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

The complex is designed for big bags, storage, replenishment of supply bins above mixers, including with the ability to work as part of the ...

Inhabited shot blasting chamber KDO-15 is a highly efficient device designed for processing shot supplied under high pressure and high speed...

Shot-blasting apparatus. The device is designed for shot cleaning of castings, rolled forgings, seams of welded joints, parts after heat tre...