Разъем рс

The sieves are designed for sieving the sand base when determining the granulometric composition of the fineness and average grain size in l...

Изготовление: - шнеки сварные, - шнековые транспортеры для различных отраслей, - изготовление витков шнека, - шнековые транспортеры для сыпу...

Лопатки графитовые для насосов компрессоров Лопатки графитовые применяются в роторно-пластинчатых насосах, а также компрессорах "сухого" (б...

Графитовые лопатки для вакуумных насосов Becker 90133400004 WN 124-031 (240х48х4) - 14 шт. Также можем изготовить лопатки любых размеров ( д...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. The company "Li...

The machine is designed to determine the ultimate compressive strength and shear strength of molding and core sands in the green state and b...

• The vibrating table is designed for compacting casting molds and cores made of sand-resin mixtures under conditions of serial and small-sc...

The machine is designed to determine the ultimate compressive strength of molding and core sands in the green state. It is used in shop floo...

This complex is designed for the preparation of cold-hardening mixtures in the production of molds and cores with the ability to work on the...

This unit is designed for cleaning small and medium-sized castings in foundries of serial and small-scale production. It can also be used fo...

Sleeve model 09721 is intended for the manufacture of cylindrical samples from wet sands of molding and core sands for determining gas perme...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

High-speed single-arm continuous mixer with a capacity of 0.5 to 2 tons of molding sand per hour. This mixer can be used both for the moldin...

• The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. • The company...

Double-arm mixer with a capacity of 3-10 t / h with a second arm 3 meters long. The second sleeve allows you to significantly expand the ser...

This unit is designed for cleaning small and medium-sized castings in foundries of serial and small-scale production. It can also be used fo...

High-speed single-arm continuous mixer with a capacity of 1 to 5 tons of molding sand per hour. This mixer can be used both for the molding ...

Sleeve model 09722 is designed to determine compaction and bulk density in accordance with GOST 23409.13-78. The principle of the liner oper...

Графит МПГ-7, МПГ-8 в блоках Мелкозернистый плотный графит марки МПГ производится путём «холодной» прессовки пресс-порошка в матрицы. Относ...

The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. The compan...

Pneumatic transport is a device in the form of a sealed vessel designed to carry out loading and unloading, transport and technological work...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

The core box is designed for the production of samples of molding and core sands tested in tension. The core box for the manufacture of "eig...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

The complex is designed for big bags, storage, replenishment of supply bins above mixers, including with the ability to work as part of the ...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. It is intended for the manufacture o...

B-1110 B-1110 Casting Cup Roller Batch Mixer The mixer is designed for the preparation of molding sand according to the ASG process. The pri...

The device is designed to determine the crumbling of molding and core sands in accordance with GOST 23409.9-78 and moldability in accordance...