Доски АЦЭИД

• The heat-resistant elevator is designed for vertical transportation of bulk materials as part of industrial production lines. • The peculi...

Компания-производитель предлагает свою продукцию по выгодным ценам Имеется продукция в наличии и под заказ Сильфонные компенсаторы 16 и 2...

High-speed single-arm continuous mixer with a capacity of 1 to 5 tons of molding sand per hour. This mixer can be used both for the molding ...

This unit is designed for cleaning small and medium-sized castings in foundries of serial and small-scale production. It can also be used fo...

• The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. • The company...

Топор универсальный «Volkshammer» Размеры: длина общая: 535 мм длина топора: 185 мм Материал рукояти : фиберглас (обеспечивает на...

Pneumatic transport is a device in the form of a sealed vessel designed to carry out loading and unloading, transport and technological work...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. The company "Li...

Sleeve model 09721 is intended for the manufacture of cylindrical samples from wet sands of molding and core sands for determining gas perme...

The sieves are designed for sieving the sand base when determining the granulometric composition of the fineness and average grain size in l...

Pneumatic transport is a device in the form of a sealed vessel designed to carry out loading and unloading, transport and technological work...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

Installation laboratory model 029, climatic version UHL, placement category according to GOST 15150-69, is designed to separate the sandy ba...

Акционерное общество АО «ТЕСТПРИБОР» предлагает высококачественные субминиатюрные цилиндрические разъемы собственного производства серии РС ...

The machine is designed to determine the ultimate compressive strength and shear strength of molding and core sands in the green state and b...

• The vibrating table is designed for compacting casting molds and cores made of sand-resin mixtures under conditions of serial and small-sc...

The machine is designed to determine the ultimate compressive strength of molding and core sands in the green state. It is used in shop floo...

This complex is designed for the preparation of cold-hardening mixtures in the production of molds and cores with the ability to work on the...

Double-arm mixer with a capacity of 3-10 t / h with a second arm 3 meters long. The second sleeve allows you to significantly expand the ser...

Sleeve model 09722 is designed to determine compaction and bulk density in accordance with GOST 23409.13-78. The principle of the liner oper...

High-speed single-arm continuous mixer with a capacity of 0.5 to 2 tons of molding sand per hour. This mixer can be used both for the moldin...

This unit is designed for cleaning small and medium-sized castings in foundries of serial and small-scale production. It can also be used fo...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

Продается газоанализатор "Автотест-02 СО СН Д Т" С встроенным термопринтером..

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. It is intended for the manufacture o...

The core box is designed for the production of samples of molding and core sands tested in tension. The core box for the manufacture of "eig...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...