Транспортерные ленты Б/У, размеры от 400 мм

This unit is designed for cleaning small and medium-sized castings in foundries of serial and small-scale production. It can also be used fo...

Pneumatic transport is a device in the form of a sealed vessel designed to carry out loading and unloading, transport and technological work...

The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. The compan...

Продам каплеструйные принтеры - маркираторы Виллетт (Willett) 405 (430) бу в хорошем состоянии, после технического обслуживания с заменой фи...

Такелажная тележка предназначена для перемещения крупногабаритных грузов в тех местах, где невозможно использовать кран, таль или лебёдку. Н...

Installation laboratory model 029, climatic version UHL, placement category according to GOST 15150-69, is designed to separate the sandy ba...

High-speed single-arm continuous mixer with a capacity of 1 to 5 tons of molding sand per hour. This mixer can be used both for the molding ...

This unit is designed for cleaning small and medium-sized castings in foundries of serial and small-scale production. It can also be used fo...

Графит МПГ-7, МПГ-8 в блоках Мелкозернистый плотный графит марки МПГ производится путём «холодной» прессовки пресс-порошка в матрицы. Относ...

• The vibrating table is designed for compacting casting molds and cores made of sand-resin mixtures under conditions of serial and small-sc...

Графитовые лопатки для вакуумных насосов Becker 90133400004 WN 124-031 (240х48х4) - 14 шт. Также можем изготовить лопатки любых размеров ( д...

The machine is designed to determine the ultimate compressive strength of molding and core sands in the green state. It is used in shop floo...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

The sieves are designed for sieving the sand base when determining the granulometric composition of the fineness and average grain size in l...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

Double-arm mixer with a capacity of 3-10 t / h with a second arm 3 meters long. The second sleeve allows you to significantly expand the ser...

The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. The company "Li...

This complex is designed for the preparation of cold-hardening mixtures in the production of molds and cores with the ability to work on the...

Изготовление: - шнеки сварные, - шнековые транспортеры для различных отраслей, - изготовление витков шнека, - шнековые транспортеры для сыпу...

This complex is designed for the preparation of cold-hardening mixtures in the production of molds and cores with the ability to work on the...

В наличии графитовые лопатки для вакуумных насосов Becker 90133000004 WN 124-034 (170х39х4 мм) - 21 шт. Так же можем изготовить лопатки любы...

B-1110 B-1110 Casting Cup Roller Batch Mixer The mixer is designed for the preparation of molding sand according to the ASG process. The pri...

The complex is designed for big bags, storage, replenishment of supply bins above mixers, including with the ability to work as part of the ...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

The core box is designed for the production of samples of molding and core sands tested in tension. The core box for the manufacture of "eig...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

Inhabited shot blasting chamber KDO-15 is a highly efficient device designed for processing shot supplied under high pressure and high speed...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. It is intended for the manufacture o...

Shot-blasting apparatus. The device is designed for shot cleaning of castings, rolled forgings, seams of welded joints, parts after heat tre...