Твердотопливный котел

This complex is designed for the preparation of cold-hardening mixtures in the production of molds and cores with the ability to work on the...

Double-arm mixer with a capacity of 3-10 t / h with a second arm 3 meters long. The second sleeve allows you to significantly expand the ser...

The machine is designed to determine the ultimate compressive strength and shear strength of molding and core sands in the green state and b...

• The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. • The company...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

ООО Промсталькомплект (г.Орёл)предлагает производство различных деталей и узлов для гидрогенераторов по чертежам заказчика. Область применен...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

Редукторы ООО Промсталькомплект (г.Орёл,ул.Московская,69) изготовит/отремонтирует редукторы: (цилиндрические, планетарные, конические, комб...

High-speed single-arm continuous mixer with a capacity of 0.5 to 2 tons of molding sand per hour. This mixer can be used both for the moldin...

This unit is designed for cleaning small and medium-sized castings in foundries of serial and small-scale production. It can also be used fo...

This complex is designed for the preparation of cold-hardening mixtures in the production of molds and cores with the ability to work on the...

High-speed single-arm continuous mixer with a capacity of 1 to 5 tons of molding sand per hour. This mixer can be used both for the molding ...

The sieves are designed for sieving the sand base when determining the granulometric composition of the fineness and average grain size in l...

This unit is designed for cleaning small and medium-sized castings in foundries of serial and small-scale production. It can also be used fo...

Кран железнодорожный КЖ-562 предназначен для погрузочно-разгрузочных работ на путях. Год выпуска: 2012

• The vibrating table is designed for compacting casting molds and cores made of sand-resin mixtures under conditions of serial and small-sc...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

Pneumatic transport is a device in the form of a sealed vessel designed to carry out loading and unloading, transport and technological work...

The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. The company "Li...

Sleeve model 09721 is intended for the manufacture of cylindrical samples from wet sands of molding and core sands for determining gas perme...

Продаем платформы фитинговые, модель 13-9751-01, 2018 год выпуска. Количество: 5 единиц. Оставляйте Ваши заявки по номеру +7 (900) 651-49-6...

The machine is designed to determine the ultimate compressive strength of molding and core sands in the green state. It is used in shop floo...

Installation laboratory model 029, climatic version UHL, placement category according to GOST 15150-69, is designed to separate the sandy ba...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

The device is designed to determine the crumbling of molding and core sands in accordance with GOST 23409.9-78 and moldability in accordance...

Inhabited shot blasting chamber KDO-15 is a highly efficient device designed for processing shot supplied under high pressure and high speed...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. It is intended for the manufacture o...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

The complex is designed for big bags, storage, replenishment of supply bins above mixers, including with the ability to work as part of the ...

The core box is designed for the production of samples of molding and core sands tested in tension. The core box for the manufacture of "eig...