Корпус под диспенсер Puloon LCDM

Продаем платформы фитинговые, модель 13-9751-01, 2018 год выпуска. Количество: 5 единиц. Оставляйте Ваши заявки по номеру +7 (900) 651-49-6...

Installation laboratory model 029, climatic version UHL, placement category according to GOST 15150-69, is designed to separate the sandy ba...

This unit is designed for cleaning small and medium-sized castings in foundries of serial and small-scale production. It can also be used fo...

This unit is designed for cleaning small and medium-sized castings in foundries of serial and small-scale production. It can also be used fo...

This complex is designed for the preparation of cold-hardening mixtures in the production of molds and cores with the ability to work on the...

The sieves are designed for sieving the sand base when determining the granulometric composition of the fineness and average grain size in l...

Pneumatic transport is a device in the form of a sealed vessel designed to carry out loading and unloading, transport and technological work...

Кран железнодорожный КЖ-562 предназначен для погрузочно-разгрузочных работ на путях. Год выпуска: 2012

Double-arm mixer with a capacity of 3-10 t / h with a second arm 3 meters long. The second sleeve allows you to significantly expand the ser...

• The heat-resistant elevator is designed for vertical transportation of bulk materials as part of industrial production lines. • The peculi...

The machine is designed to determine the ultimate compressive strength and shear strength of molding and core sands in the green state and b...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

Sleeve model 09721 is intended for the manufacture of cylindrical samples from wet sands of molding and core sands for determining gas perme...

This complex is designed for the preparation of cold-hardening mixtures in the production of molds and cores with the ability to work on the...

High-speed single-arm continuous mixer with a capacity of 1 to 5 tons of molding sand per hour. This mixer can be used both for the molding ...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

• The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. • The company...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

Предлагаем к покупке многофункциональный снегоочиститель СДПМ2 - ваш надежный помощник в борьбе с зимней непогодой и не только! Характеристи...

Designed for regeneration of spent molding and core cold-hardening (self-hardening) mixture for further use in the foundry. The machine can ...

The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology. The company "Li...

B-1110 B-1110 Casting Cup Roller Batch Mixer The mixer is designed for the preparation of molding sand according to the ASG process. The pri...

Shot-blasting apparatus. The device is designed for shot cleaning of castings, rolled forgings, seams of welded joints, parts after heat tre...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

The complex is designed for big bags, storage, replenishment of supply bins above mixers, including with the ability to work as part of the ...

The device is designed to determine the crumbling of molding and core sands in accordance with GOST 23409.9-78 and moldability in accordance...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. It is intended for the manufacture o...

Shaking-press casting molding machine without turning the mold halves, followed by additional pressing. Designed for the manufacture of uppe...

The core box is designed for the production of samples of molding and core sands tested in tension. The core box for the manufacture of "eig...